DMR V8 Pedal Spares
Description
Are your V8 Pedals looking or feeling tired from abuse? Give them a refresh with our range of service and replacement items, to get them running smooth. Full list below so you can get exactly what you need. These parts are not compatible with DMR V8 Classic pedal.
REBUILD KIT
2x Top Hat Bushing - 10mm Ø ID (Internal Diameter) 19mm Ø OD (Over All Diameter) 11.5mm Width.
2x Top Hat Bushing - 7mm Ø ID (Internal Diameter) 14mm Ø OD (Over All Diameter) 10mm Width.
2x End Caps.
2x Internal Rubber Seals.
1x LH CroMo Axle (marked CR-L).
1x RH CroMo Axle (marked CR-R).
Please Note: This rebuild kit is not compatible with DMR V8 Classic pedal.
DMR-S8-KIT-V2.1
END CAPS
Replacement end caps for DMR V8 v2 pedals. These will also fit the DMR V6 Pedal. Not compatible with DMR V8 Classic pedal.
DMR-S-V8-ENDCAPS
BUSHING KIT V2.1
This bushing kit is for the servicing latest generation DMR V8 pedals. There have been two versions in the current shape. If you have plastic grey end caps then these are the bushings you need. If you have black metal caps then you will need the V8 V2 Bushing Kit listed below. Not compatible with DMR V8 Classic pedal.
DMR-S8-BUSHKIT-V2.1
BUSHING KIT V2
This bushing kit is for the servicing latest generation DMR V8 pedals. There have been two versions in the current shape. If you have metal black end caps then these are the bushings you need. If you have grey plastic end caps then you will need the V8 V2.1 Bushing Kit listed above. Not compatible with DMR V8 Classic pedal.
DMR-S8-BUSHKIT-V2
PIN KIT
20 replacement pins for DMR V8 and V12 pedal. These pedals require 40 pins total per pair.
Pin Dimensions: M4x0.7x8mm.
DMR-PIN-99
SERVICE TOOL
The DMR V8 v2 Service Tool is designed for servicing the Dual Bushing bearing system found on the current V8 pedal with grey plastic end caps.
11mm socket (using a 13mm spanner): Used to hold the base nut, so as not to accidentally add/remove preload to the bearings.
9mm socket (using a 1/4" ratchet): Used to loosen/tighten the 9mm locking nut. To be used in tandem with the 11mm socket.
DMR-TOOL-V8-V2
Tech Guides
How to fit your DMR pedals
Fitting pedals sounds straightforward, but it’s easy to get wrong, and can prove expensive. Al Vines steers you around the potential pitfalls to get you riding your new pedals with the least amount of hassle.